![background image](http://html.mh-extra.com/html/panasonic/wv-sfn6-series/wv-sfn6-series_operating-instructions-manual_278003101.webp)
[Face SD]
With the “Face SD” setting, if a person's face is dark and difficult to see, by combining the face detection and
Super Dynamic functions, the area with the face in the image can be corrected to become brighter and easier
to see.
Select “On” or “Off” to determine whether or not to interact with the Super Dynamic function.
•
On:
The interactive control with face detection will work.
•
Off:
The interactive control with face detection will not work.
•
Default:
Off
Note
•
When “Off” is selected for “Super Dynamic(SD)”, the interactive control with face detection is
unavailable.
[Adaptive black stretch]
Select “On” or “Off” to determine whether or not to activate the darkness compensation function. The darkness
compensation function can make darker parts of images brighter by digital image processing.
•
On:
Activates the darkness compensation function.
•
Off:
Deactivates the darkness compensation function.
•
Default:
Off
IMPORTANT
•
When “On” is selected for “Adaptive black stretch”, noise in the darker parts may be increased, and
parts around borders between the darker parts and the brighter parts may become darker/brighter than
the other darker/brighter parts.
Note
•
When “On(High)” or “On(Normal)” is selected for “Super Dynamic(SD)”, “Adaptive black stretch” is
unavailable.
[Back light compensation (BLC)]
Select “On” or “Off” to determine whether or not to activate the back light compensation (BLC) function. When
“On(High)” or “On(Normal)” is selected for “Super Dynamic(SD)”, this setting is unavailable.
The back light compensation function can compensate back light by setting mask areas on brighter parts of
images.
•
On:
Mask areas will be set automatically.
•
Off:
Mask areas will not be set automatically. It is necessary to set them manually.
•
Default:
Off
[Mask area]
When “Off” is selected for “Super Dynamic(SD)” and “Back light compensation (BLC)”, it is possible to
compensate for backlight by masking brighter areas.
Refer to page 106 for information on how to set the mask area.
[Light control mode]
Select the light control mode from the following.
•
Outdoor scene:
Depending on the brightness level (illuminance), the iris will automatically be controlled
together with the shutter speed adjustment to control light. When shooting a bright subject such as outdoor,
etc., select this parameter. Be aware that flicker may occur when a subject is under fluorescent lighting.
•
Indoor scene (50 Hz) / Indoor scene (60 Hz):
The shutter speed will automatically be adjusted to prevent
flicker caused by fluorescent light. Select 50 Hz or 60 Hz corresponding to the location where the camera
is in use.
•
ELC
SPN 631
SPN 631
SPN 611
SPN 611
:
Uses shutter speed adjustment to control light.
•
Fix shutter:
Operating Instructions
101
11 Configure the settings relating to images and audio [Image/Audio]
Содержание WV-SFN6 series
