![background image](http://html.mh-extra.com/html/panasonic/wv-sf438/wv-sf438_installation-manual_277986023.webp)
23
Connection
Before starting the connection, turn off the power of this camera and the devices to be connected.
Check and prepare the required devices and cables for connection.
Note:
• Since the connector storage section does not
have a sufficient space, use a LAN cable that do
not exceed the sizes described in the illustrations.
40 mm {1-9/16 inches}
Straight section
30 mm {1-3/16 inches}
9 mm
{11/32 inches}
13 mm {1/2 inches}
Example of LAN cable connector
Caution:
• ONLY CONNECT 12 V DC CLASS 2 POWER SUPPLY or LIMITED POWER SOURCE.
z
Remove the sub cover.
Insert a thin tool* into the sub cover of the camera as illustrated, then lift up the sub cover to
remove it. Connect the cables to the camera with the sub cover attached to the camera as
shown in the illustrations.
* A slotted head screwdriver etc.
Sub cover
Sub cover
IMPORTANT:
• Do not use excessive force when removing the sub cover. Failure to observe this may dam
-
age the sub cover.