22
IMPORTANT:
• Use a switching hub or a router which is compliant with 10BASE-T/100BASE-TX.
• If a PoE+ hub is not used, each network camera must be connected to a 24 V AC power
supply.
• When using 24 V AC, power supply from a PoE+ hub or router is not required.
Connecting to a network using a PoE+ hub when the temperature is –30 °C
{–22 °F} or less
* When the temperature is –30 °C {–22 °F} or less, use a 24 V AC power supply or a tested PoE
injector
X6531
X6511
.
<Required cable> Ethernet cable (category 5e or better, straight)
Powered
speaker
Powered
speaker
Confirmation monitor
*
*
Confirmation monitor
Hub, router
RJ45 waterproof connector
RJ45 waterproof connector
Ethernet cable
(category 5e or better, straight)
Ethernet cable
(category 5e or
better, straight)
Ethernet cable
(category 5e or better, straight)
Tested PoE injector
X6531
X6511
Plug-in power type
microphone
Plug-in power type
microphone
➡
24 V AC
power supply
PC
* The audio output can be switched to the monitor
output. When using the monitor output, audio
output is not available.
