![background image](http://html.mh-extra.com/html/panasonic/wv-s4550l/wv-s4550l_important-information-manual_277956018.webp)
18
Adjustment monitor
PoE device (hub)
PC
Ethernet cable
(category 5e or better,
straight)
Powered speaker
Microphone
Use an Ethernet cable (category
5e or better, cross) when directly
connecting the camera to a PC.
When connecting to a network using a PoE hub
Before starting the installation, check the entire system configuration. The following illustration gives
a wiring example of how to connect the camera to the network via a PoE device (hub).
Ethernet cable
(category 5e or
better, straight)
Ethernet cable
(category 5e or better,
straight)
Adjustment monitor
Powered speaker
Microphone
IMPORTANT:
Use a switching hub or a router which is compliant with 10BASE-T/100BASE-TX.
When connecting WV-S4550LM or WV-X4571LM cameras, use a PoE hub with M12 con-
nectors.
If a PoE hub is not used, each network camera must be connected to a 12 V DC power supply.
When using 12 V DC, power supply from a PoE hub or router is not required.