5
ClearSight coating (rain wash coating)
*3
for dome cover (Optional accessory: WV-CW7CN)
adopted
The clear sight coating is a special coating applied to the surface of the transparent cover that
makes it difficult for water droplets to adhere to the dome cover.
The camera conforms to the IP66
*4
and Type 4X (UL50)
*5
, is compliant with NEMA 4X
*6
ratings, and provides high dust resistance and waterproof performance.
Waterproofing treatment is not required for the camera body (Waterproofing treatment is required
for cable connections).
Achieves high-level shock resistance with IK10
*7
(IEC 62262) conformity.
The camera has a strong shock resistance body which is needed in outdoor installations.
*1 A technology to significantly reduce a band by increasing the compression ratio of areas where a
subject does not move and optimizing the refresh interval and frame rate according to subject
motions.
*2 For further information about Extension Software refer to our website
(https://security.panasonic.com/support/info/ <Control No.: C0103>).
Refer to page 6 about "<Control No.: C****>".
*3 The rain wash coating is only effective against water (rain water) and is not effective against other
substances such as oil or damage to the dome cover.
*4 IP66: The applicable product has “Dust tight (6)” protection against foreign solids and has
“Powerful water jets (6)” protection against water (IEC60529).
*5 Type 4X (UL50): 4X indicates the rank in the UL waterproof standard.
*6 NEMA: Dust resistance and waterproof performance standards set by National Electrical
Manufacturers Association (United States).
*7 IK10: is a standard in regards to shock resistance that represents the level of impact protection,
and is regulated by the International Electrotechnical Commission (IEC).
