Panasonic WV-S2500 Series, Руководство по эксплуатации

Страница: 51 / 236

[Alarm deactivation time]
Set the duration for which detection is not to be performed after an alarm has been detected. For example, by
using this function you can prevent mail from being sent too often when the E-mail notifications are configured
to be sent to cellular phones when an alarm is detected.
5 – 600 seconds
•
Default: 5s
Note
•
The duration of the alarm deactivation time can be specified for each type of alarm. For example,
during the time when detections for “Terminal alarm 1” are not made, detections for “VMD alarm”
can be made.
[Next] button
If you click the [Next] button, the alarm function type setup menu will be displayed. (
®
page 51)
Note
•
If you click the [Next] button, the setting items in the screen are saved.
[Back] button
If you click the [Back] button, the event function type setup menu will be displayed. (
®
page 49)
2.3.2.3 Alarm: Configure the alarm function type (Alarm function type
setup menu)
Select the alarm function type as “FTP img. trans.” or “SD memory recording”.
[Trigger]
•
FTP img. trans.: When an alarm occurs, performs FTP transfer of the JPEG image.
•
SD memory recording: When an alarm occurs, records the image to the SD memory card.
Note
•
“FTP img. trans.” for when an alarm occurs and “FTP periodic image transmission” can both be
performed simultaneously.
•
If both “FTP img. trans.” for when an alarm occurs and “FTP periodic image transmission” are set,
“FTP img. trans.” will be given priority when an alarm occurs.
[Recording format]
When “SD memory recording” is selected for “Trigger”, “JPEG(1)”, “JPEG(2)”, “JPEG(3)”, “Stream(1)”,
“Stream(2)”, “Stream(3)”, or “Stream(4)” can be selected for the stream encoding format for the recorded
image.
[Next] button
If you select “FTP img. trans.” for “Trigger” and click the [Next] button, the FTP transfer setup menu will be
displayed. (
®
page 52)
Operating Instructions 51
2 Settings