17
A
Network connector (RJ45)
Connect an Ethernet cable (category 5e or better) to the network connector.
IMPORTANT:
Use all 4 pairs (8 pins) of the Ethernet cable.
Make sure that the PoE device in use is compliant with IEEE802.3af standard.
When connecting both the 12 V DC power supply and the PoE device for power supply, 12 V
DC will be used for power supply.
When the Ethernet cable is disconnected once, reconnect the cable after around 2 seconds.
When the cable is quickly reconnected, the power may not be supplied from the PoE device.
A
Network connector (RJ45)
B
12 V DC power supply terminal
F
MONITOR OUT terminal
(factory shipment: NTSC monitor)
C
Audio input connector
D
Audio output connector
E
EXT I/O terminals
S2131L
S2111L
S2131L
S2111L
S2131L
S2111L
S2131L
S2111L
■
Terminals
* This illustration represents WV-S2131L
S2131L
S2111L
