21
C
SD MOUNT indicator
D
Lens (compatible)
When an SD memory card is inserted and could
Lights off
→
Blinks green
→
be recognized
Lights off
When data can be saved after the SD memory card is
Lights off
→
Lights green
inserted and the SD ON/OFF button is pressed
(less than 1 second)
When data can be saved to the SD memory card
Lights green
When the SD memory card is removed after holding down
Lights green
→
Blinks green
→
the SD ON/OFF button (about 2 seconds)
Lights off (recording)
Lights green
→
Lights off
(waiting for recording)
When data cannot be saved to the SD memory card
Lights off
because an abnormality was detected or the SD
memory card is configured not to be used
Note:
Lighting/blinking LED can be turned off with the software settings at any time. (The initial state is
lighting or blinking.) Set the LED to be solid off if necessary, depending on the installation condi-
tions. (
☞
Operating instructions included in the CD-ROM)
The lens section is not included with the camera. It is possible to mount a 1/2.7 type video camera
lens to the camera. It is recommended to use a compatible high-resolution lens especially when the
illuminance level of the photographic subject is low and the camera is used with the lens iris open.
Refer to our website (https://security.panasonic.com/support/info/) for further information about the
compatible lens.
