11
Step 8
Loosen the stopper bracket fixing screw, slide
the stopper bracket toward the outside of this
bracket (in the unlock
w
direction of the label),
and unlock the height adjusting screw.
Step 9
Rotate the height adjusting screw (one of 4
points) clockwise when viewing it from beneath
(in the
e
down direction of the label), and
move the camera mounting stage from the
back to the front side. At this moment, the
paper gauge attached to the camera mounting
stage descends together. Be careful to prevent
the cables from being caught between the
mounting chassis and camera mounting stage.
Camera mounting
stage
Height adjusting screw
Tightening torque: 0.1 N·m {0.07 lbf·ft}
* Do not apply equal to or more than 0.29 N·m
{0.21 lbf·ft} of torque. Failure to observe this
may cause damage.
Camera mounting stage
Paper gauge
Height adjusting screw (mounting
chassis inside)
Adjustment can be performed with
the height adjusting screw at 1 point.
Stopper bracket
Height adjusting
screw
Stopper bracket
fixing screw
