Monitor Images on a PC (continued)
38
(6)
[Image capture size]
Click these buttons to set the resolution of the main
area to VGA or QVGA.
These buttons will be displayed only when "JPEG" is
selected as the image type.
[VGA] button
Click this button to display images in the main area at
VGA size.
[QVGA] button
Click this button to display images in the main area at
QVGA size.
(7)
[ZOOM]
Click the desire button to enlarge the displayed image.
Only the image in the main area is enlarged.
[X1] button
Return to the original display size (1x size).
[X2] button
Display image with 2x size.
[X4] button
Display image with 4x size.
(8)
[Brightness]
*2
Click these buttons to adjust the brightness of the
image.
[-] button
The displayed image will be darker.
[0] button
The adjusted brightness will return to the default
brightness.
[+] button
The displayed image will be brighter.
(9)
AUX
*2
Click these buttons to switch the state of the AUX
connector.
[OPEN] button
Sets the AUX connector to open.
[CLOSE] button
Sets the AUX connector to closed.
(10)
[Alarm occurrence
indication] button
*2
This button will be displayed and will blink when an
alarm has occurred. When this button is clicked, the
alarm output terminal will be reset and this button will
disappear. (
→
Setup Manual)
(11)
[Full screen] button
Click this button to display images on a full screen. To
return to the "Live" page, press the [Esc] key, the [F5]
key, or the combination of the [Alt] key and [F4] key on
the PC's keyboard.
(2/3)
No.
Item
Description
