25
Problem
Cause and Recommended Action
Reference Pages
Power cord sheathing is
damaged.
• The power cord is damaged. Continued use creates the risk of
electric shock and fire. Immediately unplug the power plug and
contact a qualified service person or system installer for servicing.
Power cord becomes
hot during operation.
Power cord becomes
warm or hot when it is
bent or stretched during
use.
●
Periodically check the power cord.
Camera position is
different from the
preset position setting.
• Perform REFRESH from the special setup menu.
Operating
Instructions
Picture is different from
the position setting.
• Adjust the picture using the preset menu and a
scene file.
Operating
Instructions
Upper part of the picture
is black when the
camera is in a horizontal
orientation.
It is hard to see images
with the camera when
there are raindrops on
the dome cover.
• This is caused by the camera's internal cover. It
does not indicate malfunction.
• The effectiveness of the rain wash coating may
have been reduced. Refer to "Cleaning this product
body" in "Precautions for use" and clean the dome
cover. If the situation does not improve contact your
dealer.
Operating
Instructions
8
Camera suddenly starts
to pan by itself.
• If the cleaning function is turned on, this is normal
does not indicate malfunction. Check the
CLEANING settings.
Operating
Instructions
• If the cleaning function is not turned on, this
symptom could be due to noise.
7, 10
Operating
Instructions
The camera movement
mode (OFF, SEQ,
SORT, AUTOPAN,
PATROL, AUTOTRACK)
setting changes.
• Check the self return function.
