40
7. Use the joystick to match the vertical phases for both video output
signals as closely as possible. (COARSE adjustment can be
incremented in steps of 22.5 degrees (16 steps) with the joystick.)
Note:
After the 16 steps, the adjustment returns to the first step.
8. Move the cursor to FINE by using the joystick.
9. Use the joystick to match the vertical phase for both video output
signals as closely as possible.
Notes:
• When the “|” cursor reaches the “+” end, it jumps back to “–”.
At the same time, COARSE is incremented by one step to
enable a continuous adjustment. The reverse takes place
when the “|” cursor reaches the “–” end.
• When the joystick is kept at the right or left for one second or
more, the “|” cursor moves quickly.
• To reset COARSE and FINE to the preset values at the facto-
ry, press the F2 button of the WV-CU550B. (For the WV-
RM70, press the Right and Left switches simultaneously.)
COARSE is preset at the factory to zero-crossing of the AC
line phase.
• If the AC line contains noise (spike noise, etc.), the stability of
the vertical phase of the camera video output signal may be
disturbed.
8. White Balance Setting (WHITE BAL)
(1) Auto-Tracing White Balance Mode (ATW)
1. Display SET UP on the monitor screen.
(Refer to Setup Menu Display on page 16 for details on displaying
the SET UP menu on the monitor screen.)
2. Move the cursor to WHITE BAL and select ATW by using the joy-
stick. The white balance of the camera is automatically set.
3. For fine adjustment of the ATW, press the CAM (SET) key to dis-
play the ATW fine adjustment menu on the monitor screen.
4. Move the cursor to “R.”
Use the joystick to obtain the optimum amount of red gain. The “I”
cursor moves to the right or left.
5. Move the cursor to “B.”
Use the joystick to obtain the optimum amount of blue gain. The
“I” cursor moves to the right or left.
6. Move the cursor to RET by using the joystick and press the CAM
(SET) key to return to SET UP.
1 (1 - - - 16): 0 degrees
2 (1 - - - 16): 22.5 degrees
16 (1 - - - 16): 337.5 degrees
** SYNC **
V PHASE
COARSE
FINE
RET
1(1--16)
•|•••••••
- +
** SYNC **
V PHASE
COARSE
FINE
RET
4(1--16)
••••••|••
- +
** SYNC **
V PHASE
COARSE
FINE
RET
1(1--16)
•|•••••••
- +
** SET UP **
CAMERA ID
ALC/MANUAL
SHUTTER
AGC
SENS UP
SYNC
WHITE BAL
MOTION DET
AF MODE
RET SPECIAL2
OFF
ALC
OFF
ON(MID)
X2 AUTO
INT
ATW
OFF
MANUAL M
Camera setting menu
** ATW **
R
B
RET
••••|••••
- +
••••|••••
- +
ATW fine adjustment menu
