10
Camera operation setting [CAMERA SETUP]
The following settings related to camera actions can be configured on the "CAMERA SETUP"
screen displayed from the top screen. Refer to page 5-6 for how to call up the screen.
The settings configured on the "CAMERA SETUP" screen will be saved as a scene file.
1
Register a scene file [SCENE1/SCENE2]
It is possible to register 2 patterns of scene file. When different settings are to be applied
between day and night, SCENE1 can be applied in the daytime and SCENE2 at night. Change
between the scene files can be made by shortcut operation. (
page 27) "SCENE1" is set as
the default setting.
Screen when "SCENE1" is selected
Screen when "SCENE2" is selected
**CAMERA SETUP**
SCENE1
ALC/ELC ALC
SHUTTER OFF
AGC ON(HIGH)
SENS UP OFF
WHITE BAL ATW1
DNR HIGH
AUTO1
VMD
RET TOP END
D&N(IR)
OFF
**CAMERA SETUP**
SCENE2
COPY(SCENE1)
ALC/ELC ALC
SHUTTER OFF
AGC ON(HIGH)
SENS UP OFF
WHITE BAL ATW1
DNR HIGH
AUTO1
VMD
RET TOP END
D&N(IR)
OFF
Step 1
After confirming that "SCENE1" is selected, configure the settings of "ALC/ELC" through
"VMD". (
page 11-19)
To change the scene files, go to step 2.
Step 2
Move the cursor to "SCENE1" and use the [RIghT] or [LEfT] button to select "SCENE2".
→
The screen changes and displays “SCENE2”.
Step 3
To configure the settings of "SCENE2" using the settings of "SCENE1", press the [SET] button
after moving the cursor to "COPY(SCENE1)".
→
The settings of "SCENE1" will be copied to "SCENE2".
Step 4
Edit the settings to be changed.
The number displayed at the right side of the title on
each setting screen indicates a scene file number.
Step 5
Move the cursor to "SCENE2" and press the [RIghT] or [LEfT]
button to select "SCENE1" to resume normal operation.
Scene file
number
**ALC CONT**(1)
BACK LIGHT COMP
OFF
ABS
MASK SET
- +
LEVEL .I..... 0
RET TOP END
BLC
ON
