Panasonic WORKIO DP-C323 Скачать руководство пользователя страница 210

Страница: 210 / 220

210

Chapter 9 Solving Problems

495

Telephone line disconnected.

Check with the other party.

501/502/503/

504

Communication error occurred
using the internal V.34 Modem.

Check with the other party.

540/541/542/

543/544

Communication error occurred
while transmitting.

Reload the document and send again.
Check with the other party.

550

Telephone line disconnected.

Check with the other party.

552/553/554/

555

Communication error occurred
while receiving.

Check with the other party.

580

Sub-address transmission to a
unit that has no Subaddress
function.

Check the remote station.

581

Sub-address Password
transmission to a unit that has
no Password Sub-address
function.

Check the remote station.

623

No document is loaded in the
ADF.

Resend the documents.

630

Redial was not successful due to
a busy line.

Reload the document and send again.

631/700

During dialing, STOP was
pressed.

Reload the document and send again.

634

Redial was not successful due to
no response from the called
station or wrong number dialed.
If a dial tone is not detected, the
machine does not transmit.

Note

: If busy tone was not

detected, the machine will
only redial once.

Check the telephone number, and send again.
Change the setting of “

68 Dial Tone Check

” is

set to “

Off

” in Function Parameters (Fax/Email

Settings> Fax Parameters).

Operating
Instructions (For
Function
Parameters)

638

Power failure occurred during
the communication.

Check the power cord and plug.

711

Incorrect LDAP settings.

Check the LDAP Server Name, LDAP Log in
Name, LDAP password, LDAP Search Base.

Operating
Instructions (For
Function
Parameters)

712

Incorrect email address.

Check the registered email address.
Check the IP Address of the SMTP Server with
the Network Administrator.

Operating
Instructions (For
Setting Up)

714

Cannot log on to the LAN.

Check the 10Base-T/100Base-TX cable
connection. An unexpected LAN problem
occurred. Contact the Network Administrator.

Operating
Instructions (For
Setting Up)

715

TCP/IP connection timed out.

Check the Internet Fax parameter settings.
Verify the IP Address, Default Gateway IP
Address, SMTP Server IP Address.

Operating
Instructions (For
Setting Up)

Info. code

Problem

Action

Refer to

Содержание WORKIO DP-C323





























































































































































































































Результаты поиска

Содержание WORKIO DP-C323

Отзывы:

Похожие инструкции для WORKIO DP-C323

Бренды по названию

Популярные бренды

Panasonic WORKIO DP-C323, Руководство по эксплуатации

Результаты поиска

Содержание WORKIO DP-C323

Отзывы:

Похожие инструкции для WORKIO DP-C323

Бренды по названию

Популярные бренды