Panasonic Workio DP-C305, Сканирование/Отправка по электронной почте

Страница: 40 / 62

40
Chapter 3 Scanner Settings
Chapter 3
Scanner Settings
Setting the Scanning Quality
Documents, whether in full colour or monochrome, are scanned in three-colours.
z The Colour mode settings are reset to their factory defaults when:
- The
Reset key is pressed.
- The Auto Reset Time interval has lapsed (default = 1 min).
- The power is turned OFF.
- A scan job is completed.
1
Press the Scan/Email key.
2
Select “ Basic Menu ”.
3
Set the desired scanning modes.
Quality Adjustment
„ Colour Setting
1
Select the colour mode, and then
select “
OK ”.
z If the above screen is not displayed, see
steps 1 to 3 on the left column.
Quality Adj. (see pages 40 to 47)
File Type and Name (see page 48)
Original Size :
From Platen Glass only.
When the original size is not correctly
detected, select “ Original Size ”, and select
original size, and then select “ OK ” on the
display.
2-Sided Original (see page 50)
Job Build and SADF (see pages 52 to 53)
Multi-Size Feed :
When scanning mixed size originals, select
“ Multi-Size Feed ”.
Ex : A4 and A3 size originals
Full Colour Mode
Colour Original Three-colours
(Red, Green
and Blue)
Grey Scale Mode
Colour Original Grey Scale
(Halftone)
Black Mode
Colour Original Monochrome
(Bi-level)
Monochrome Original
Monochrome
(Bi-level)