[P R I N T ]
Intuitive Print Driver Control
The graphical
printer driver
screen makes it easy to control
a WORKiO DP-3510 located in a remote area – directly
from your desktop. While checking the virtual printed results
on the left side of the printer you can specify printing
commands via the easy-to-use
graphical user interface
.
Finished results like sorted, stapled or hole punched can be
confirmed on-screen, eliminating errors. The new visual
Status Monitor
enables you to check the current status of a
WORKiO DP-3510 located in a remote area allowing you to
quickly respond to problems such as low toner or paper
supply.
Console Management System
(with MetaConsole™ technology licensed by Netaphor™ Software)
With this console management system, you can link
WORKiO to a popular
Enterprise Console System
(such as
HP OpenView, Tivoli Enterprise, Microsoft Management
Console (MMC)) and set it up as device that can be
managed by the console.
* MetaConsole™ is a registered trademark of Netaphor™ Software Inc.
Print Data Storage Box
Inside the WORKiO DP-3510 you can store printing data in
your
Mail Box
or
Security Box
. This special hard disk area
can be used as a personalized disk space for up to 100
different users. With your User ID specified, you can store
printing data for output later, so you don’t have to keep your
PC and application on after sending it to your Mail/Security
Box.
High security levels
are available with 8-digit User ID’s
and 4-digit Passwords
to protect the stored
printed data.
Intelligent Job Control Management
The enhanced graphical LCD display, enables you to view
and even delete the
Print Queue
for each copy or print job,
while approximate
Job Time
display is convenient for
reduction of TCO (total cost of ownership). If the WORKiO
DP-3510 is on a network, the network administrator not
only monitors
device status
with the job queue and other
WORKiO controls, but can also
set up or configure
the
WORKiO DP-3510 . This is especially convenient when
changing the machine configuration or updating the
firmware.
True Distributed Printing Solution
With WORKiO DP-3510 , you not only get the simplest print connection available, you also
get a powerful print management solution with OneRIP. For true distributed printing, OneRIP
for Panasonic allows you to connect up to 10 WORKiO printers over your network. You can
manage all your jobs in one place, and easily print from any client PC. With OneRIP for
Panasonic, you can also cluster your printers for printer load balancing and high-volume
printing at enhanced speeds. There is no extra hardware to buy – just
install the OneRIP for Panasonic software on any computer and connect
directly to the WORKiO DP-3510 ’s standard network interface. It is
truly powerful plug and play print management.
Printer management and
clustering for high-speed
printing with OneRIP
DP3510cat0529.qx4 02.5.30 2:12 PM Page 7