38
Making Copies
A4
:
A4-R
A5
:
A5-R
A5
:
A5
B4
:
B4
A4
:
A4
A3
:
A3
Other Features
■
Skyshot Mode
Skyshot allows copying a manuscript without generating dark borders even if the Platen Cover or ADF is opened.
Two types of Skyshot modes can be selected;
Digital Skyshot Mode : The scanning area (size) is not pre-determined.
Manual Skyshot Mode: The scanning area (size) is pre-registered into memory (M1 and M2) in advance.
■
Digital Skyshot Mode
Digital Skyshot allows the copying of a
manuscript without generating dark borders
even if the ADF or Platen Cover is open.
The default setting of Digital Skyshot Mode
is “NORMAL”. This default setting can be
changed in the Copier Settings.
(See page 49)
1
2
Open the ADF
or Platen Cover
From Platen
Upper-
Left
Corner
1
■
Manual Skyshot Mode
Set the "08 Manual Skyshot Mode" in the
Copier Settings first. (See page 49)
NOTE
●
When using the manual skyshot mode,
the M1 and M2 are turned On and
another job requiring memory cannot be
used.
●
An incorrect position detection of the
original may occur when a strong light
shines onto the glass during the skyshot
mode.
NOTE
The default setting of Digital Skyshot Mode is “NORMAL”. In this
setting, the unit scans once. If there are black areas around the
borders in the copies, set the Digital Skyshot Mode to “QUALITY”
to soften the dark borders. In this setting, the unit scans twice.
OFF
: NONE
NORMAL
: Default setting (usually select this mode).
QUALITY
: For better definition, select the Quality mode.