6
Panasonic System Solutions
HDE300_SATAConversionGuide_B
WJ-HDE300 S-ATA conversion guide
Maintenance guide
(17) Remove five screws fixing the main board, and then fix
the main board with six hexagonal spacers (7 mm).
(18) Fix the S-ATA board mounting angle to the hexagonal
spacers with five additional screws.
(19) Fix one hexagonal spacer (22 mm) to the S-ATA board
mounting angle
.
(20) Insert two S-ATA boards into the ATA connectors on the
main board, and fix them with two screws each.
Note:
Circled tapped holes on the S-ATA connector side are not
necessarily screwed.
(21) Attach eight cord clamps to the bottom of the main chassis
as shown right.
モード
RAID5
復帰
切
入
HDD
電源
Two screws that fixed the main board
Hexagonal spacers
(22mm)
Hexagonal spacer
six screws (7mm)
SATA board
mounting angle
SATA
board
Additional
five screws
Without
screw
210mm
100mm
70mm
Main
board
