53
Configure the advanced settings for schedule recording [Advanced schedule
setup]
In addition to schedule recording, up to 3 event recordings each can be set up on Time table 1 and 2.
Clicking the [Advanced >] button in the "Schedules" field will open the "Advanced schedule setup" page.
■
Days to record
Select the actions to be taken on each day of the week
based on a time table. [
a
] indicates the selected state, [
b
]
the unselected state.
Time table1: Recording according to Time table 1.
Time table2: Recording according to Time table 2.
Off: Neither schedule nor event recording will take place.
■
Event recording
Set the recording duration in the event that an alarm occurs
and the recording duration before an alarm occurs.
[Event recording duration]
Set the recording duration in the event that an alarm occurs.
2 s/ 5 s/ 10 s/ 20 s/ 30 s/ 1 min/ 2 min/ 3 min/ 5 min/
10 min/ 15 min
Manual: Recording will continue while receiving an alarm
input signal. Recording will be performed for at least
8 seconds.
Ext.: Alarm output will continue until the alarm action is
reset.
Default:
30 s
[Pre-event duration]
Set the recording duration before an alarm occurs.
0 s/ 5 s/ 10 s/ 15 s
Default:
0 s
Note:
• The actual recording time may sometimes be longer
than the duration selected for this setting.
• Pre-event recording is not performed when "0 s" is
selected.
• When images are set to be recorded together with
audio, the audio may not be recorded at the beginning
of the pre-event recording.
• The pre-event recording duration of cameras with the
image capture size of "FHD(1920x1080)", the image
quality of "XF" and the frame rate of "10 ips" or more will
be less than 10 seconds.
■
Schedule to record
3 schedule recordings and 3 event recordings each can be
set up on Time table 1 and 2. Within the same time table,
event recording has priority over schedule recording.
[Schedule recording] (
☞
Page 52)
[HDD saving mode] (
☞
Page 52)
[Event recording]
Set the time table for recording in the event that an alarm
occurs. Alarm that falls into a time table that has not been
set up will not trigger recording. Refer to page 51 for how to
configure the time bar.
[e-Mail]
To send an alarm e-mail when an event occurs, mark this
item.
[Panasonic alarm protocol]
Mark the checkbox of this item to automatically transmit
information on an event that occurs to a PC using the
Panasonic alarm protocol.
[Back] button
Click the button after completing the settings. The screen
returns to the [Recording setup] tab.
Содержание WJ-NV200VK
Страница 101: ...101 ...
