16
Upload the Setup File
Screenshot 1
Operate using the buttons on the tool bar on the opera-
tion window.
Step 1
Click the [Upload] button on the tool bar.
It is also possible to upload the created/edited setup file to the network disk recorder.
Important:
• When trying to upload the setup file, entering the Administrator password of the network disk recorder will be
required. Refer to the Setup Instructions (PDF) for further information.
• When the camera settings ("Camera" - "NW Camera Setup") are changed, there may be possibilities that images
from the camera cannot be displayed. At the default setting, the setting values of "NW Camera Setup" are set as
a masked item. (The setting values will not be uploaded.)
• When the network settings ("Comm" - "Basic setup") are changed, connection error may occur on the network
disk recorder.
At the default setting, the setting values of "Basic setup" are set as a masked item. (The setting values will not be
uploaded. Refer to the next page for further information.)
• Do not upload the setup file to the same network disk recorder from two or more PCs simultaneously using this
software. Otherwise, an error may occur on the network disk recorder.
• When the setting for "Line Speed" ("Comm" - "Basic setup" - "Line Speed") is changed, the network disk recorder
will restart.
• It is impossible to upload the setup file during starting up the network disk recorder or while performing the sys-
tem check of the network disk recorder.
