manualshive.com logo in svg

Panasonic WJ-HD616G, Руководство по эксплуатации

Поделиться
Скачать
Panasonic WJ-HD616G Скачать руководство пользователя страница 8

8

Recording mode

It is possible to directly connect up to 16 cameras to the recorder and record images from them on the hard 
disk drives.
The following recording modes are available.

Emergency recording:   Recording that is performed manually using an external switch, etc. when an emergen

-

cy occurs

Manual rec. operation:  Recording that is started and stopped manually
Schedule recording: 

 Recording that is automatically performed at the designated time range on the desig-
nated day(s) of the week

Event recording: 

 Recording that is automatically performed at an event occurrence (such as VMD, termi-
nal alarm/camera site alarm, video loss, etc.)

Important:

  •  Recording may not be performed around for 

3 seconds in the following cases. However, this is not a mal-

function. 

 

•  When the settings are changed and the setup menu is closed during recording

 

• 

When the resolution, image quality or the recording rate is changed during recording

 

•  When a post-event recording or an emergency recording starts/ends during recording

 

Event type

Event recording types displayed on a list on various windows are as follows.

MAN:

 Manual recording

SCH:

 Schedule recording

EMR:

 Emergency recording

The following are detailed event recording types.

VMD:

 Displayed when a motion is detected

LOSS:

 Displayed when a video loss occurred

COM:

 Displayed when a command alarm occurred

TRM:

 Displayed when a terminal alarm occurred

SITE:

 Displayed when a camera site alarm occurred

CMTN:

 Displayed when a motion is detected (SD5 camera)

CRMV:

 When an object appears/disappears (SD5 camera)

CSTY:

 Displayed when a staying object is detected (SD5 camera)

CDRT:

 Displayed when a object moving to the specified direction is detected (SD5 camera)

CTRM:

 Displayed when a camera terminal alarm occurred (SD5 camera)

CSCD:

 Displayed when an interference with the camera is detected (SD5 camera)

PRE:

 Pre-event recording

Содержание WJ-HD616G






































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды