Panasonic WJ-GXE500 Скачать руководство пользователя страница 41

Страница: 41 / 73

: Click this button to display the setup menu of

camera.

: Click this button to close the setup menu of

camera.

: Click this button to move to the submenu.

: Click these

buttons to move the cursor.

: Click these

buttons to select the param-

eters.

: Click this button to return to the previous page.

: Display the setup menu of camera,

move the cursor onto "SPECIAL", and click this but-
ton to move to the SPECIAL SETUP menu.

Move the cursor onto REFRESH on the SPECIAL

SETUP menu, and click this button to refresh the
camera position.

Item names and operations may differ depending on

the cameras. Refer to the operating instructions of
the camera for further information.

: Click this button after moving the cur

sor onto CAMERA RESET on the SPECIAL SETUP
menu to reset to the default setting. Refer to the
operating instructions of each camera for further
information about the settings to be reset.

About the operation panel

Use the following buttons on the operation panel to operate the "Camera setup" page using a PC.

[Audio] tab

Refer to page 28 for general information about this tab.

Setup items

Setting values (Underlined: default)

Audio transmission/reception *1 *2 *3 *4

Off/Mic input/Audio output/Interactive(Half-duplex)/
Interactive(Full-duplex)

Audio bit rate *5

16kbps/32kbps

Mic input volume (Camera to PC)

Mic High/Mic Middle/Mic Low/Line High/Line Middle/Line
Low

Mic Input Interval (Camera to PC) *6 *7

20ms/40ms/80ms/160ms

Audio output volume (PC to Camera)

High/Middle/Low

Audio output interval (PC to Camera) *6 *7 *8 *9

160ms/320ms/640ms/1280ms

Audio output port (PC to Camera) *10

1 024 - 50 000 (Default: 34 004)

Permission level of audio trans./recep.

1. Level 1 only/2. Level 2 or higher/3. All users

• Images and audio will not be synchronized. Therefore, images and audio may not always match.

• Audio may be interrupted depending on the network environment.

• Howling may be generated depending on usage conditions. If howling is generated, prevent sound gener

ated by the PC from entering the PC microphone.

Содержание WJ-GXE500










































































Результаты поиска

Содержание WJ-GXE500

Отзывы:

Бренды по названию

Популярные бренды

Panasonic WJ-GXE500, Руководство по эксплуатации

Результаты поиска

Содержание WJ-GXE500

Отзывы:

Бренды по названию

Популярные бренды