background image

FV-05VFL3     FV-08VFL3     FV-11VFL3

SUPPLIED ACCESSORIES

Part name

Part name

Appearance

Appearance

Quantity

Quantity

Grille

 Suspension
   bracket  

 Suspension
   bracket  

 Suspension
  bracket  

  Screw
(ST4.2X8) 

  Screw
(ST4.2X12) 

1

1

1

1

2

2

  Machine screw
        (M4X8) 

        Long screw
        (ST4.2X20) 

        32W
  Fluorescent
        lamp

        4W
 Night lamp

        Lighting unit

2

6

1

1

1

UNPACKING

Unpack and carefully remove unit from carton.
Refer to the Supplied Accessories list to verify that all parts are present.

DESCRIPTION

1

  Screw
(ST4.2X16) 

2

        3 inches adaptor
             connector
         (optional part)

4

These products are listed by UL under UL file No. E78414.

These products use a sirocco fan driven by a capacitor motor. The motor is designed to have an extended 
service life with reduced energy consumption. lt also incorporates a thermal-cutoff for safety. 
The grille covering the main body is a spring-loaded, quick-release type. 
A damper for preventing counterflow is provided.
The lighting unit is an energy-saving lighting device which uses one 32W fluorescent lamp and produces 
almost the same illumination as a standard 100W incandescent lamp.

This product contains electronic ballast with one fluorescent lamp and is in compliance with Part 18 of 
the FCC rules as consumer RF lighting device. Operation is subject to the following two conditions: 
(1) This device may not cause harmful interference. 
(2) this device must accept any interference received, including interference that may cause undesired 
      operation.

This product may cause interference to radio equipment and should not be installed near maritime safety 
communications equipment or other critical navigation or communication equipment operating between 
0.45-30 MHz. lf interference should occur, try to increase spacing between this product and the other 
product.
    

Doc Responsible Party:            Panasonic Corporation of North America
                                                   One Panasonic Way, Secaucus, NJ 07094
Sales Company:                        Panasonic Corporation of North America
                                                   One Panasonic Way, Secaucus, NJ 07094
Customer Call Support:           1-866-292-7292

Содержание Whisper Fit-Lite FV-05VFL3

















Отзывы: