background image

9

ENGLISH

Symptom

Symptom

Check

Check

Heating operation is not working effi ciently.

•  Set the temperature correctly.

•  Is the panel heater valve closed.

•  Clear any obstruction at the air inlet and air outlet vents of outdoor unit.

Noisy during operation.

•  Check if the unit has been installed at an incline or the cover is not 

closed properly.

The unit does not work.

•  Check if the circuit breaker is tripped.

Operation LED is no lit or control panel display

is blank.

•  Is the power supply off or power failure.

  Check the following before calling for servicing.

  Check the following before calling for servicing.

   TROUBLESHOOTING

 TROUBLESHOOTING

Symptom

Symptom

Cause

Cause

Water fl owing sound during operation.

•  Refrigerant fl ow inside the unit.

Operation is delayed a few minutes after 

restart.

•  The delay is a protection to the unit’s compressor.

Outdoor unit emits water/steam.

•  Condensation or evaporation occurs on pipes.

Outdoor unit emits steam during heating 

mode.

•  This is due to defrost operation happens at the heat exchanger.

Outdoor unit does not operate.

•  When the outdoor temperature is out of the operation condition range, 

the heatpump system enter protection control.

System diffi cult to heat-up.

•  When heating is operated by indoor unit together with fl oor heating or 

panel heater simultaneously, there may be case where warm water 

temperature is getting lower and cause fl oor heating or panel heater 

heat-up is weaken.

•  When outdoor air temperature is low, it may be diffi cult to get warm.

•  Is the snow pile blocking the discharge outlet or intake inlet of outdoor 

unit.

•  When water outlet set temperature is low, it may be diffi cult to get warm.

System cannot get warm instantly. 

•  Due to the nature of the heatpump system, it may take some time to 

heat-up the water if the unit is operated from cold-start.

Operation starts after power resumes.

•  Auto restart is in function and operates under.

  The following symptoms do not indicate malfunction.

  The following symptoms do not indicate malfunction.

Содержание WH-SD24AE













Отзывы: