Panasonic VL-WD613AZ, Начало работы

Страница: 2 / 8

Introduction
This product is an additional product designed to be used with the following Panasonic Video Intercom Systems.
– VL-SWD501AZ/VL-SWD501UAZ (Main monitor station: VL-MWD501BX)
(The corresponding models are subject to change without notice.)
You must register this product with your Video Intercom System before it can be used.
R This manual describes only the steps needed to register and begin using the product. Please read the Operating
Instructions of the Video Intercom System for further details.
R The illustrations in the supplied manual(s) may vary slightly from the actual product.
Product names used in this manual
Model No. Product name Name in this manual
VL-MWD501BX Main monitor station Main monitor
VL-WD613AZ
*1 Wireless monitor station Sub monitor
*1 The product label reads as follows: VL-WD613BX
Accessory information
Supplied accessories
Accessory item Quantity
AC adaptor/PNLV226AL 1
Rechargeable batteries
*1 2
Charger 1
*1 Please read the Operating Instructions of the Video Intercom System for information about replacement batteries.
Note:
R You will need the following additional items (locally procured) to install the charger on the wall.
– Screws x 2 (for wall mounting):
Prepare the screws according to the material, structure, strength and other factors of the mounting area and
the total weight of objects to be mounted.
R Please read the Operating Instructions of the Video Intercom System for additional/replacement accessories.
General information
R In the event of problems, you should contact your equipment supplier in the first instance.
For your future reference
We recommend keeping a record of the following information to assist with any repair under warranty.
Serial No. Date of purchase
(found in the battery compartment of the product)
Name and address of dealer
Attach your purchase receipt here.
2