Important Information
5
For best performance
Before using
L
It is prohibited to disassemble or modify this unit. Contact the dealer where you purchased this unit for repair.
L
When power fails, this unit cannot be used.
L
For the recorded image:
The recorded image may be lost when:
– Mishandled
– Electric shock or radio wave interference occurs.
– The power is turned off during use.
(We might not be held responsible for the damage.)
Location/avoiding noise
L
The main monitor station, the sub monitor station and the camera use radio waves to communicate with each
other. For maximum distance and noise-free operation, we recommend the following:
– Placing the unit away from electrical appliances such as:
• TVs.
• personal computers.
• Microwave ovens.
• Wireless LAN appliances.
• Other sub monitor stations.
• Other cameras.
• If you use the sub monitor station near a microwave oven which is being used, noise may be heard. Move
away from the microwave oven and closer to the main monitor station.
Environment
L
Keep the unit away from electrical noise generating devices, such as
fl
uorescent lamps and motors.
L
The unit should be kept away from excessive smoke, dust, high temperature and vibration.
L
The unit should not be exposed to direct sunlight.
L
Do not place heavy objects on top of the unit.
L
When you leave the unit unused for a long period of time, unplug it from the power outlet.
L
The unit should be kept away from heat sources such as heaters, kitchen stoves, etc. It should not be placed in
rooms where the temperature is less than 0 °C or greater than 40 °C. Damp basements should also be avoided.
L
The maximum calling distance (approx. 100 m) may be shortened when the unit is used in the places:
– Where there are following obstacles between the main monitor station and the sub monitor station:
• Metal doors or metal shutters.
• Heat insulation including aluminium foil.
• Concrete walls or walls made of galvanized iron sheet.
• When using the sub monitor station on the different
fl
oor or house in the same grounds from where the main
monitor station has been installed.
• Many walls.
L
Operating near 2.4 GHz electrical appliances may cause interference. Move away from the electrical appliances.
Important:
L
When you move the sub monitor station from a cold place to a warm place, wait a little while to let the sub monitor
station adapt to the change in environment before use. In this case, condensation such as the formation of dew
may occur, resulting in error or malfunction.
Tapping
This unit uses digital wireless technology so that a call is rarely intercepted. However, calls may be tapped by a
third party because the unit also communicates using radio waves.
L
“Tapping” means that the other party intercepts a radio message intentionally or accidentally by using a receiver.
VL-W600BX̲ZA̲maybe̲E.indd 5
VL-W600BX̲ZA̲maybe̲E.indd 5
2009/04/01 17:52:32
2009/04/01 17:52:32
Содержание VL-W600BX
Страница 31: ...31 Notes ...