Specifications
Door station (VL-VN1500)
Power source
When using PoE: Class 2,
IEEE 802.3af
When using power supply
unit (VL-PS240): 24 V DC,
0.6 A
Power
consumption
Standby: approx. 2.5 W for
PoE, 2.6 W for VL-PS240
During operation: approx.
5.1 W for PoE, 6.3 W for
VL-PS240
Dimensions
(mm) (height
´
width
´
depth)
Approx. 141
´
100
´
28.5
(excluding protruding
sections)
Mass (weight)
Approx. 250
g
Operating
environment
Ambient temperature:
approx. -10 °C to +55 °C
Relative humidity
(non-condensing): up to
90 %
Installation
method
Wall mount (mounting base
supplied)
Image sensor
1/3-inch CMOS sensor
(approx. 1.3M pixels)
Viewing angle
Horizontally: approx. 113°
Vertically: approx. 69°
Minimum
illuminance
required
1 lx
(within approx. 50 cm from
the camera lens)
Lighting method
LED lights
IP rating
IP54
Card reader
(RFID)
ISO/IEC 14443 Type A
(MIFARE
®
)
(Frequency: 13.56 MHz; RF
transmission power:
42 dBµA/m (max.) @ 10 m)
Video format
H.264 codec
Audio format
G.711 codec
Network
interface
Ethernet II (DIX)
Network protocol
TCP/IP, UDP
Communication
mode
Speed, Duplex AUTO
(10BASE-T/100BASE-TX,
FULL/HALF) (Auto
negotiation)
*1 Water resistance is only assured if the product
is installed correctly according to the
instructions, and appropriate water protection
measures are taken.
Power supply unit (VL-PS240, sold separately)
The power supply unit is for indoor use only.
Power source
Input: 220-240 V AC, 0.2 A,
50/60 Hz
Output: 24 V DC, 0.6 A
Dimensions
(mm) (height
´
width
´
depth)
Approx. 116
´
100
´
54
(excluding protruding sections)
Mass (weight)
Approx. 230
g
Operating
environment
Ambient temperature: approx.
0 °C to +50 °C
Relative humidity
(non-condensing): up to 90 %
Installation
method
Attach to DIN rail
Wall mount (using included
screws)
Relay box (VL-RLY1, sold separately)
Power source
Power supplied by the door
station
Dimensions
(mm) (height
´
width
´
depth)
Approx. 92
´
78
´
38 (excluding
protruding sections)
Mass (weight)
Approx. 130
g
Operating
environment
Ambient temperature: approx.
0 °C to +40 °C
Relative humidity
(non-condensing): up to 90 %
Installation
method
Attach to DIN rail
Wall mount (using included
screws)
18
Other information
