Basic operation
Enter the room number with the keypad →
{ }
.
When the ringer tone is heard, press
{
TALK
}
.
L
Confirm the caller before answering.
Other operation
At the lobby station
Searching by first letter of the name
1
Press
{ }
→ use the keypad to enter the first letter of the resident’s name.
2
Press
{ }
or
{ }
to search for the desired name.
3
Press
{ }
to call.
Opening the door by entering an unlock code
1
Press
{
#
}
→ enter the 4-digit unlock code.
L
For information about the unlock code, please contact your building manager.
2
Press
{ }
to unlock.
Switching the image displayed on the main monitor
While talking to the main monitor, press
{
#
}
to switch the image displayed on the main monitor from the lobby
station to the camera. To return to the lobby image, press
{ }
.
At the main monitor
Monitoring the lobby station or camera image
1
Press
→ select the desired destination →
.
L
If a camera is connected to the lobby station, you can alternate monitoring between the lobby station and
camera by pressing
Camera
or
Lobby
.
Opening the door
You can open the lobby door while talking or monitoring the lobby station image. Press
to open the door.
Calling the PBX extension
1
Press
{
}
→ select the desired destination →
.
Please note the following system conditions and limitations.
L
Only one call or monitoring session can be handled at a time.
Low priority: Monitoring
Medium priority: General calls (lobby station to main monitor, main monitor to PBX extension, etc.)
High priority: Emergency calls
L
All calls and monitoring sessions are disconnected after the pre-programmed "timeout" time elapses.
L
Following features are not available for the lobby station:
– Zoom position settings
– Wide/Zoom settings
– Doorphone connection settings
L
In order to perform the above operations, optional devices and configuration for those devices are required.
Contact your building manager for more information.
