13
Programming
Confirming a room number
1
Press and hold the PROGRAM switch for about 2
seconds during standby.
2
Enter
{
0
}{
0
}{
2
}
, then press
{
CALL
}
.
3
Enter the desired terminal number (001-020) (in 3
digits), then press
{
CALL
}
.
L
The terminal number and the room number are
displayed alternately.
L
To confirm another room number, press
{
CALL
}
, then
repeat this step.
4
When finished, press
{
CLR
}
.
5
To end programming mode, enter
{
9
}{
9
}{
9
}
, then press
{
CALL
}
.
Confirming all room numbers
1
Press and hold the PROGRAM switch for about 2
seconds during standby.
2
Enter
{
0
}{
0
}{
3
}
, then press
{
CALL
}
.
L
The terminal number 01 and the room number are
displayed alternately.
3
To confirm the next room number, press
{
CALL
}
.
L
The next terminal number and the room number are
displayed.
4
When finished, press
{
CLR
}
.
5
To end programming mode, enter
{
9
}{
9
}{
9
}
, then press
{
CALL
}
.
Canceling the registration of a room number
1
Press and hold the PROGRAM switch for about 2
seconds during standby.
2
Enter
{
0
}{
0
}{
4
}
, then press
{
CALL
}
.
3
Enter the desired terminal number (001-020) (in 3 digits)
for the room number to be erased, then press
{
CALL
}
.
L
“dEL” and the terminal number are displayed
alternately.
4
Press
{
CALL
}
to cancel the registration.
L
To delete another room number, repeat from step 3.
5
To end canceling the registration, press
{
CLR
}
.
6
To end programming mode, enter
{
9
}{
9
}{
9
}
, then press
{
CALL
}
.
Canceling the registration of all room numbers
1
Press and hold the PROGRAM switch for about 2
seconds during standby.
2
Enter
{
0
}{
4
}{
4
}
, then press
{
CALL
}
.
L
“ALL” and “dEL” are displayed alternately.
L
To stop deleting numbers, press
{
CLR
}
.
3
Press
{
CALL
}
to cancel the registration.
4
To end programming mode, enter
{
9
}{
9
}{
9
}
, then press
{
CALL
}
.
Registering room numbers
Register each room number to each terminal number (01-20) (page 10).
1
Press and hold the PROGRAM switch for about 2 seconds during standby.
2
Enter
{
0
}{
0
}{
1
}
, then press
{
CALL
}
.
3
Enter the desired terminal number (001-020) (in 3 digits), then press
{
CALL
}
.
L
To correct the number, press
{
CLR
}
, then repeat this step.
4
Enter the desired room number (within 3 digits), then press
{
CALL
}
.
L
The terminal number and room number are displayed alternately.
L
To correct the number, press
{
CLR
}
, then repeat from step 3.
L
“Err” (Error) is displayed when a registered room number is entered. Press
{
CLR
}
, then repeat from step 3.
5
Press
{
CALL
}
again to save the setting.
L
After the room number is registered, the display on the right is shown.
L
To register other room numbers, repeat steps 3 to 5.
L
To confirm the room numbers, press
{
CLR
}
, then continue from step 2 of
“Confirming all room numbers” below.
6
To end the registration, press
{
CLR
}
.
7
To end programming mode, enter
{
9
}{
9
}{
9
}
, then press
{
CALL
}
.
N
To change a room number
Enter the new room number in step 4. The previous room number is replaced with the new one.
VL-V591_IG_en.indd 13
2017/09/22 19:03:00
