background image

Thank you for purchasing a Panasonic product.

Please read this guide before using the unit and save for future reference.

© Panasonic Corporation 2017

1006, Oaza Kadoma, Kadoma-shi, Osaka 571-8501, Japan

http://www.panasonic.com

PNQX8620ZA

     

C0917MM1

Installation and Operation Guide

Lobby Station

Model No.

 VL-V591

Contents

Introduction

System component .............................................................2

Included items .....................................................................2

Important Information

For your safety ....................................................................3

Important safety instructions .............................................4

For best performance .........................................................4

Other information ................................................................4

Controls

Location of controls ............................................................5

Installation

Before installation ...............................................................6

Installing the lobby station .................................................7

Wiring schematic diagram ................................................10

Programming

How to program the settings ............................................12

Registering room numbers ..............................................13

Setting the PIN (Personal Identification Number)

 ..........14

Setting the time how long the door remains open .........14

Using the Lobby Station

Calling a room from the lobby station .............................15

Opening the door using the PIN  

   (Personal Identification Number)

 ..................................15

General Information

Cleaning .............................................................................16

Specifications

 ....................................................................16

Other Infomation................................................................16

VL-V591_IG_en.indd   1

2017/09/22   19:02:53

Содержание VL-V591

















Отзывы: