Panasonic VL-SV74BX Скачать руководство пользователя страница 16

Страница: 16 / 99

4.2.2.2

Main Board

Call Button (SW301)

Outline of Operation : When a visitor presses the Call Button, a chime tone will ring at the monitor station.

FM Signal Modulator (IC200)

Operating Power Supply : +5V (+5V : 2, 9pin)

Package : 24pin SOP

Outline of Operation : The frequency modulation of the video signal taken in from Camera Unit is carried out.

+5V Regulator (IC202)

Input Voltage : +20V

Output Voltage : +5V

Package : SOT-23-6W

Outline of Operation : It generate from +20V to +5V.

Voice Amplifier (IC100)

Operating Power Supply : +5V

Package : 8pin SSOP8

Outline of Operation :

• The voice signal from the Microphone is amplified and sent to the Monitor Station.

• The voice signal from the Monitor Station is amplified and sent to the SP amp (IC102).

Speaker Amplifier (IC102)

Operating Power Supply : +5V

Package : VSP-8pin

Outline of Operation : The voice signal from the Voice amp (IC100) is amplified and sent to the Speaker.

MCU (IC203)

Operating Power Supply : +5V

Package : 32pin QFP

Outline of Operation :

• It communicates with the Monitor Station by AM signal through IC200.

• It controls of the camera, the electric lock, and the lighting, by the operation from the Monitor Station.

• Control (zoom processing, backlighting compensation) of a camera is carried out by I2C communication.

• At night, MCU turns on LED200 and LED201 automatically based on the information from IC204.

Illumination sensor (IC204)

Operating Power Supply: +5V

Package: 4pin COB

Outline of Operation: The surrounding brightness is detected and the level is outputted to MCU.

- 16 -

Содержание VL-SV74BX




































































































Результаты поиска

Содержание VL-SV74BX

Отзывы:

Похожие инструкции для VL-SV74BX

Бренды по названию

Популярные бренды

Panasonic VL-SV74BX, Руководство по обслуживанию

Результаты поиска

Содержание VL-SV74BX

Отзывы:

Похожие инструкции для VL-SV74BX

Бренды по названию

Популярные бренды