background image

6

Important Information

Installation

L�

If there are no obstacles between this unit and the main monitor station, you can install 

the unit within about 100 m from the main monitor station. 

(Usage area varies depending on the location where the unit is installed. Install the unit in 

the locations where the STATUS indicator lights in green (page 14).)

Lights in green.

While in use

L�

If there are no obstacles between this unit and the sub monitor station, the sub 

monitor station can be used within about 100 m of this unit.

 

(Usage area varies depending on the location where the unit is installed.)

L�

In places where the radio signal from the main monitor station is stronger, the 

main monitor station directly communicates with the sub monitor station without 

relaying through the repeater.

 (In this case, the IN USE indicator may not light up.)

Radius of radio waves 

from the main monitor 

station.

Radius of radio waves 

from the repeater.

In places where the radio signal from 

the main monitor station is stronger, the 

main monitor station communicates with 

the sub monitor station without relaying 

through the repeater.

In places where the radio signal 

from the repeater is stronger, the 

main monitor station communicates 

with the sub monitor station by 

relaying through the repeater. (The 

IN USE indicator lights in green.)

VL-FAN1BX_0329.indd   6

2006/03/29   20:23:29

Содержание VL-FAN1BX





















Отзывы: