Panasonic VL-CM850A, Руководство по эксплуатации

Страница: 25 / 40

Error messages
Problem Cause & Solution Page
CANNOT CONNECT TO
CAMERA The following may be causing the problem.
R The Wireless Camera is turned off.
– Turn the Wireless Camera on.
9
R The batteries of the Wireless Camera have run out of
power.
– Replace the batteries.
22
R The Wireless Camera is turned on, but the Wireless
Camera is out of range from the Monitor.
– Move the Monitor to an area close to the Wireless
Camera that has no obstructions between the Wireless
Camera and Monitor. (When the Wireless Camera is in
range of the Monitor it can connect to the Monitor.)
– Turn the power for the Wireless Camera off then on.
(When the Wireless Camera is in range of the Monitor it
can connect to the Monitor.)
– When using a replacement Wireless Camera when
servicing your original Wireless Camera, the
replacement Wireless Camera must be paired to the
Monitor. Refer to the following for instructions on how to
pair the Wireless Camera.
7
9
n How to pair Wireless Cameras
After performing operations on the Monitor, perform
operations on the Wireless Camera within about 2 minutes.
Monitor operations:
A Press M MENU N , MDN , and M N (Monitor button) at the
same time. (Enters
CAMERA PAIRING MODE
.)
B Press M N (Monitor button).
Wireless Camera operations:
C Insert the batteries (page 15).
D Turn the power for the Wireless Camera on while pressing
the pair button with a pointed object (keep pressing the pair
button until the pair indicator starts flashing).
R The pair indicator starts flashing quickly.
–
The pair indicator changes in the following manner
when pairing is successfully completed:
flash quickly
®
light for about 10 seconds
®
go out
– The pair indicator changes in the following manner
when pairing fails (Pairing must be performed
again.):
flash quickly
®
go out
25
Help