86
Message
Meaning / Action
Manual IP setting not correct
The system is unable to set the IP address. Consult your Internet Service
●
Provider or telecommunications company.
Max. number of Timers already set !
The maximum number of timer programming events is 15.
●
New channels found!
Press OK to update channel list
Press EXIT to ignore.
There may be new channels available.
●
This message will appear each time a change is made by the
●
broadcasters. This message can be deactivated by setting “New Channel
Message” to Off in “DVB Tuning Menu”.
Selecting OK will perform “Update Channel List”.
No channel found.
Please check aerial or local signal
availability.
Press OK to start Auto Setup.
Please follow the message.
●
If it is still failed, consult your local Panasonic dealer.
No module inserted
Check the CI module inserted completely (p. 49).
●
No recording - Check media
The tape or disc may be “write protected”, missing or damaged.
●
No recording - Already recording
The equipment may already be recording.
●
No recording - Unknown reason
The recording may not be performed. Check the equipment.
●
Disc or tape may be full.
●
No service
The broadcaster has stopped the service. Check the channel in the TV
●
Guide. (p. 18 and p. 19)
No signal
The TV cannot detect the signal. Check the connection of the RF cable.
●
PIN incorrect!
The PIN number you entered is wrong.
●
Please check settings and connections
on HDMI devices.
Communication error in VIERA Link function (p. 69).
●
Please enter a frequency between
10700 and 12750 MHz
The frequency you entered is out of range. Consult the received satellite
●
broadcasting company. (p. 42)
Please wait.
A function is in progress.
●
On screen messages
