How to Use Menu Functions
43
Menu
Item
Adjustments / Configurations (alternatives)
Setup
Link Settings
Intelligent Auto
Standby
Makes non-watched or non-used connected equipment go into Standby mode to
reduce the power consumption
[Off] / [On (With reminder)] / [On (No reminder)]
(p. 91)
●
This function is available when [VIERA Link] is set to [On].
Download
Downloads channel, language and country / region settings to Q-Link or
VIERA Link compatible equipment connected to the TV
●
DVB-S and DVB-C channel settings cannot be downloaded.
Child Lock
Applies access control for channels or inputs to prevent unwanted access (p. 57)
Tuning Menu
∗
Favourites Edit
Creates a list of favourite channels (p. 50)
●
Not valid on Analogue mode
Channel List
Skips the unwanted channels or edits channels (p. 51)
Auto Setup
Automatically searches for the receivable channels (p. 46 - 49)
Manual Tuning
Searches for the channels manually (p. 52)
Update Channel
List
Updates the channel list while keeping your settings (p. 53)
●
For DVB mode
Favourite Network
Selects your favourite network for each broadcasters (only available in some
countries)
●
For DVB-C or DVB-T mode
New Channel
Message
Selects whether to give a notification message when a new channel is found
[Off] / [On]
(p. 53)
●
For DVB mode
Service
Replacement
Set to [On] to enable a message to switch to the available service (only available
in some countries)
[Off] / [On]
●
For DVB-C mode
Signal Condition
Checks the signal condition (p. 53)
●
Not valid on Analogue mode
Antenna System
Sets the antenna system to use plural LNBs for receiving several satellites
[One LNB] / [MiniDiSEqC] / [DiSEqC 1.0] / [Single Cable]
(p. 46)
●
This TV supports DiSEqC Version 1.0.
●
For DVB-S mode
LNB Configuration
Selects the satellite for each LNB (p. 46)
●
For DVB-S mode
Attenuator
Automatically reduces the DVB-C signal to avoid the interference
[Off] / [On]
●
If the DVB-C signal is too strong, the interference may occur. In this case set to
[On] to reduce the signal automatically.
Add TV Signal
Adds the TV mode
●
This function is available if you skip any modes to tune in [Auto Setup] for first
using the TV.
●
To operate, refer to the “Auto Setup” operations for first using the TV (p. 15).