80
FAQs
White spots or shadow
images (noise)
Check the position, direction, and
●
connection of the aerial.
Neither image nor sound
is produced
Is the TV in AV mode?
●
Check the correct AV input mode is
●
selected.
Check the mains lead is plugged into the
●
socket outlet.
Has the TV been turned On?
●
Check the Picture Menu (p. 30) and
●
volume.
Check all required SCART cables and
●
connections are firmly in place.
Auto aspect
Auto aspect is designed to provide you
●
with the best ratio to fill the screen. (p. 74)
Press the ASPECT button if you would
●
like to change the aspect ratio manually
(p. 17).
S-Video / black and white
picture
Check that the output of the external
●
equipment matches the input of the TV.
If the output of the external equipment is
set to S-Video, the TV must also be set to
S-Video (p. 24).
No programmes shown
on TV Guide
TV Guide: Portrait
D 1 BBC ONE
D 7 BBC THREE D 14 E4
D 70 BBC FOUR
Wed 24th
Wed 24/10/2007
10:46
All Types
All Channels
Reset channels. (p. 34 and p. 35)
●
Check the digital transmitter.
●
Adjust the direction of the dish or aerial to
●
another transmitter installed nearby.
Check the analogue broadcast.
●
If the image quality is poor, check the
aerial and consult your nearest dealer.
freesat Auto Setup cannot
be done completely
Check connections and dish alignment. The
●
dish needs to be pointing at Astra 2 at 28.2°
East, and Eurobird 1 at 28.5° East.
If the problem persists, consult your freesat
●
registered retailer or call Freesat (UK) Ltd
on
0844 881 6700
or visit
www.freesat.co.uk
Remains channel number, input
mode, etc. on the TV screen
-I.e. EC/AV1
Press the
●
button to clear these.
Press again to redisplay.
Q-Link function does not work
Confirm SCART cable and connection.
●
Also set “AV1 / AV2 out” in the Setup Menu (p. 32).
“VIERA Link” function does not work
and an error message appears
Confirm the connection. (p. 64 and p. 65)
●
Turn the connected equipment on and then switch the TV
●
on. (p. 67)
Recording does not start immediately
Check the settings of the recorder. For details, read the
●
manual of the recorder.
Timer Programming might be performed.
●
Contrast is reduced
Contrast is lowered in the following conditions without any
●
user operation for a few minutes:
no signal in freesat, DVB, Other Sat. or AV mode
•
selected locked channel
•
selected invalid channel
•
selected radio channel
•
displayed menu
•
Digital teletext (no video contents)
•
Thumbnail, list or still picture in SD Card mode or
•
DLNA operations
Before requesting service or assistance, please follow these simple guides to resolve the problem.
If the problem still persists, please contact your local Panasonic dealer or Panasonic Customer Care
Centre for assistance. For details p. 88
