SD CARD
HDMI 4
AV3
R
L
V
S-V
8
Using the clamper
To tighten:
Keep the
knob pressed
Rear of the TV
To loosen:
Do not bundle the RF cable and mains lead together (could cause distorted image).
●
Fix cables with clampers as necessary.
●
When using the optional accessory, follow the option’s assembly manual to fix cables.
●
Identifying Controls
TV
C.A.T.S. (Contrast Automatic Tracking System) sensor
Senses brightness to adjust picture quality when “Eco Mode” in the Picture Menu
●
is set to “On” (p. 16)
Changes the input mode
Mains power On / Off switch
Switch On to turn on the TV or turn the TV
●
to standby mode by the remote control
Function select
Volume / Contrast / Brightness / Colour /
●
Sharpness / Tint (NTSC mode) /
Bass / Treble / Balance / Auto Setup
Remote control signal receiver
Do not place any objects between the TV remote control signal receiver
●
and remote control.
Recording LED
Standby for Direct TV Recording: orange
●
Increases or decreases the channel
position by one. When a function is
already displayed, press to increase or
decrease the selected function. When
in Standby mode, switches TV On.
AV3 terminals
Headphones
jack
CI slot
HDMI4 terminal
SD Card slot
Power LED
Standby: red
●
On: green
When using the remote control, indicates the TV has received a command.
●
Accessories / Options