T
uning and Editing Channels
34
Set Analogue channel manually [Analogue Manual Tuning]
Set Analogue channel manually after Automatic Channel Search.
Example: Antenna
Analogue Manual Tuning
Searching channels.
Scan up
Scan down
Start Frequency (MHz)
48.00
1
Enter the frequency to start scanning
2
Select the scanning method
select
access
[Scan up]:
Scans ascendingly from the entered frequency to higher
frequencies
[Scan down]:
Scans descendingly from the entered frequency to lower
frequencies
Set DVB channel manually [Manual Tuning]
Normally use [Automatic Channel Search] or [Scan] to retune DVB channels.
If tuning has not been done completely or for adjusting the direction of the aerial, use this function.
All channels found will be added to the Channel List.
DVB-C :
1
Enter the frequency
2
Search
DVB-C Manual Tuning
DVB-C Manual Tuning
Cable
Scan
Frequency (KHz)
Modulation
Auto
Signal Level
Symbol Rate(Ksym/s)
Signal Condition
306000
6875
0%
0
0
DVB-T :
1
Adjust frequency for each channel
2
Search
DVB-T Manual Tuning
DVB-T Manual Tuning
Antenna
Scan
Channel
Signal Level
Signal Condition
2
0%
0
0
select
access
List favourite DVB channels [Favourites Edit], Skip unwanted channels [Skip]
Create your favourite channel lists from various broadcasters.
1
Select a channel to list
(
: Encrypted channel)
Favourites Edit
1 Analogue
3 Digital
2 Analogue
4 Digital
select
[Add] / [Remove]
: [Add]
: [Remove]
Skip unwanted channels
[Skip]
You can hide unwanted channels.
The hidden channels cannot be displayed except in this function. Use this function to skip unwanted channels.
Select a channel and reveal / hide
Skip
1 Analogue
3 Digital
2 Analogue
4 Digital
access
select
: Hide (skip)
: Reveal
To change page (page up)
To change page (page down)
To select
To exit
(red)
(green)
(yellow)
(blue)
Содержание Viera TX-L32X5E
Страница 59: ...59 ...
