On-screen messages | Maintenance
102
Message
Meaning / Action
Timer already expired !
●
The starting time in Timer Programming has already passed. Set the timer
correctly (p. 52).
Timer incorrect !
●
Set the start and end times in Timer Programming correctly (p. 52).
Timer overlap.
Press OK to keep, RETURN
to edit.
●
Timer programming events are overlapped. Press the OK button to keep the
overlapped setting. [Ext Rec.] is given priority over [Reminder]. When two or
more [Ext Rec.] overlap, the first timer programming event starts and finishes
as programmed. The next timer programming event can then start.
Tuner Locked
Press EXIT to unlock and stop
recording
●
If you want to unlock the tuner, cancel Direct TV Recording (p. 80, 82) or the
recording of Timer Programming (p. 52).
Unable to download, please
check equipment
●
The tape or disc is active. Stop the equipment and try again.
3D image not available.
●
You may use a function not available for 3D effect. Exit the function to view the
3D images.
■
Media Player / Network
Message
Meaning / Action
An internal error occurred.
●
Check the settings. (p. 71 - 74)
Cannot read file
●
The file is broken or unreadable. Check applicable data format. (p. 90, 91)
Communication with the
server failed.
●
This might be a problem of the media server.
Read the manual of the server software.
Connection to the server failed.
●
Check the connections and settings. (p. 70 - 74)
Ethernet cable not connected
●
Check the connection of the LAN cable. If you use a hub, also check the light
on the hub is lit.
●
The LAN cable might be defective.
No Device Inserted
●
Confirm the SD Card or USB device is inserted correctly.
No valid file to play
●
The card has no data.
Server not found
●
There are no available media server on your home network.
Check the connections and settings. (p. 70 - 74)
The software update is not
completed.
●
Network download failed. Check the connections and settings. (p. 70 - 74)
This operation is not possible
●
The selected operation is not available.
Maintenance
First, remove the mains plug from the socket outlet.
Display panel, Cabinet, Pedestal
Regular care:
Gently wipe the surface of the display panel,
cabinet, or pedestal by using a soft cloth to clean the
dirt or fingerprints.
For stubborn dirt:
First clean the dust on the surface. Dampen a soft cloth with
clean water or diluted neutral detergent (1 part detergent to 100
parts water). Wring the cloth and wipe the surface. Finally, wipe
away all the moisture.
Caution
●
Do not use a hard cloth or rub the surface too hard, otherwise this may cause scratches on the surface.
●
Take care not to subject the TV’s surfaces to water or detergent. Liquid inside the TV could lead to product failure.
●
Take care not to subject the surfaces to insect repellent, solvent, thinner or other volatile substances. This may
degrade surface quality or cause peeling of the paint.
●
The surface of the display panel is specially treated and may be easily damaged. Take care not to tap or scratch the
surface with your fingernail or other hard objects.
●
Do not allow the cabinet and pedestal to make contact with a rubber or PVC substance for a long time. This may
degrade surface quality.
Mains plug
Wipe the mains plug with a dry cloth at regular intervals. Moisture and dust may lead to fire or electrical shock.
