Link F
unc
tions (
Q
-Link /
VIER
A Link)
61
VIERA Link “
Control™”
Enjoy additional HDMI Inter-Operability with Panasonic products which have “HDAVI Control” function.
This TV supports “HDAVI Control 5” function.
Connections to the equipment (DIGA Recorder, HD Video Camera, Player theatre, Amplifier, etc.) with HDMI and SCART cables
allow you to interface them automatically (p. 58, 59).
These features are limited to models incorporating “HDAVI Control” and “VIERA Link”.
t
Some functions are not available depending on the equipment’s version of HDAVI Control. Please confirm the connected
equipment’s version of HDAVI Control.
t
VIERA Link “HDAVI Control”, based on the control functions provided by HDMI which is an industry standard known as HDMI
CEC (Consumer Electronics Control), is a unique function that we have developed and added.
As such, its operation with other manufacturers’ equipment that supports HDMI CEC cannot be guaranteed.
t
Please refer to individual manuals for other manufacturers’ equipment supporting VIERA Link function.
t
About applicable Panasonic equipment, consult your local Panasonic dealer.
Preparations
t
Connect the equipment supporting VIERA Link.
t
VIERA Link connection
(p. 58, 59)
t
Use fully wired HDMI compliant cable. Non-HDMI-compliant cables cannot be utilized.
Recommended Panasonic’s HDMI cable part number :
t
RP-CDHS15 (1.5 m)
t
RP-CDHS30 (3.0 m)
t
RP-CDHS50 (5.0 m)
t
Use fully wired SCART cable.
t
Set up the connected equipment. Read the manual of the equipment.
t
For optimal recording, the settings of the recorder may need to be changed. For details, read the manual of the recorder.
t
Download preset - channel, language, country / region settings
“Preset download” (see below)
t
Set [VIERA Link] [On] in the Setup Menu
[VIERA Link] (p. 30)
t
Set up the TV
After connection, turn the equipment on and then switch the TV on.
Select the input mode to HDMI1, HDMI2 or HDMI3 (p. 23), and make sure that an image is displayed correctly.
This setup should be done each time when the following conditions occur :
t
for the first time
t
when adding or reconnecting equipment
t
when changing setup
Features available
Preset download
Channel, language, country / region settings can be downloaded to the recorder.
t
DVB-C channel settings cannot be downloaded.
t
To download settings
[Download] (p. 30) or [Auto Setup] (p. 35) or “Auto Setup” - when first using the TV (p. 12, 13)
Easy playback
Automatic input switching - When the connected equipment is operated, input mode is switched automatically. When it is
stopped operating, input mode is returned.
Power on link
Set Power on Link [On] in the Setup Menu to use this function
[Power on Link] (p. 30)
When the connected equipment starts playback or direct navigator / function menu for the equipment are activated, the TV is
automatically turned on. (Only when the TV is in Standby mode.)
Power off link
Set Power off Link [On] in the Setup Menu to use this function
[Power off Link] (p. 30)
When the TV is set to Standby mode, the connected equipment is also automatically set to Standby.
t
This function will work even if the TV enters Standby mode automatically by auto power standby function.
