Quick Star
t Guide
A
cc
essories / Options
6
Accessories / Options
Standard accessories
Remote Control
t
N2QAYB000487
TV
TV
AV
jkl
ghi
mno
tuv
pqrs
wxyz
abc
def
Batteries for the
Remote Control (2)
t
R6
(see below)
Pedestal
(p. 7)
Assembly screw
for Pedestal (3)
M4
Operating Instructions
Pan European Guarantee Card
t
Accessories may not be placed all together. Take care not to throw them away unintentionally.
t
This product contains possibly dangerous parts (such as plastic bags), that can be breathed in or swallowed by young
children accidentally. Keep these parts out of reach of young children.
Optional accessories
Please contact your nearest Panasonic dealer to purchase the recommended optional accessories. For additional details, please
refer to the manual of the optional accessories.
Wall-hanging bracket
t
TY-WK23LR2W
Rear of the TV
Holes for wall-hanging bracket installation
100 mm
Depth of screw : minimum 5 mm,
maximum 9 mm
Diameter : M4
100 mm
(View from the side)
Screw for fixing the TV onto the wall-hanging bracket
(not supplied with the TV)
Warning
t
Failure to use a Panasonic bracket or choosing to mount the unit yourself will be done at the risk of the consumer. Always
be sure to ask a qualified technician to carry out set up. Incorrect fitting may cause equipment to fall, resulting in injury and
product damage. Any damage resulting from not having a professional installer mount your unit will void your warranty.
t
When any optional accessories or wall hanging brackets are used, always ensure that the instructions provided are followed
fully.
t
Do not mount the unit directly below ceiling lights (such as spotlights or halogen lights) which typically give off high heat.
Doing so may warp or damage plastic cabinet parts.
t
Take care when fixing wall brackets to the wall. Wall mounted equipment shall not be grounded by metal within the wall.
Always ensure that there are no electrical cables or pipes in the wall before hanging bracket.
t
To prevent fall and injury, remove TV from its fixed wall position when no longer in use.
Installing / removing remote’s batteries
1
Pull open
Hook
2
Note the correct polarity
(+ or -)
Close
Caution
t
Incorrect installation may cause battery leakage and corrosion, resulting in damage to the remote control.
t
Do not mix old and new batteries.
t
Replace only with same or equivalent type. Do not mix different battery types (such as alkaline and manganese batteries).
t
Do not use rechargeable (Ni-Cd) batteries.
t
Do not burn or break up batteries.
t
Do not expose batteries to excessive heat such as sunshine, fire or the like.
t
Make sure you dispose of batteries correctly.
t
Ensure batteries are replaced correctly, there is danger of explosion and fire if battery is reversed.
t
Do not disassemble or modify the remote control.