How to Use the Menu Functions
35
Advanced Settings
3D Refresh Rate
• Auto
• 100Hz
• 120Hz
Changes the setting of the high-speed motion picture response
Resolution
Enhancer
• Off
• Mid
• Max
Enhances the picture resolution to make the image sharper
•
This function is available for SD (Standard definition) signal.
•
As for HD (High definition) signal, this function is available when aspect
mode is set to [16:9] ([16:9 Overscan] is set to [On]), [4:3 Full] or
[Zoom].
•
Not valid on VIERA Connect and Media Player
Side Panel
• Off
• Low
• Mid
• High
Increases the brightness of the side panel
•
The recommended setting is [High] to prevent panel “image retention”.
16:9 Overscan
• Off
• On
[On]:
Default - Image is overscanned by ~5% beyond the edge of the
screen to hide edge video noise
[Off]:
Displays image in its original size including edge video noise such
as lines, dashes, dots etc.
•
Applicable for video signals when TV aspect is set to [16:9]
•
Memorised separately for SD and HD channels / signals
DVI Input Setting
• Normal
• Full
Changes the black level in the image for HDMI input mode with DVI input
signal manually
•
When the DVI input signal from the external equipment, especially from
PC, is displayed, the black level may not be suitable. In this case, select
[Full].
•
The black level for HDMI input signal will be adjusted automatically.
•
For HDMI input mode with DVI input signal only
Pixel Orbiter
• Auto
• On
Selects the mode for wobbling of the image to prevent panel
“image retention”
[Auto]:
Automatically works only for the appropriate images and you
rarely recognise the wobbling.
Scrolling Bar
Scrolls the vertical bar to prevent panel “image retention”
•
Press the OK button to start scrolling and press any buttons (except
Standby) to exit this mode.
Reset Picture Defaults
Press the OK button to reset the present Picture Viewing Mode of the
selected input to the default settings
∗
1 : PC input mode only
