16
Identifying Controls
Display Unit
Tuner Box
Wireless Unit
Remote control signal receiver
Do not place any objects between the TV remote control signal receiver and remote control.
●
Function select
Volume / Contrast / Brightness /
Colour / Sharpness /
Tint (NTSC mode) / Bass / Treble /
Balance / Auto Tuning (p. 32 and p. 33)
Remote Pairing (p. 19)
●
●
Power LED
Standby: red
On: green
When using the remote control, indicates
the TV has received a command.
●
●
Power LED
Standby: red
On: green
When using the remote control, indicates the TV has received a command.
●
●
Mains power On / Off switch
Turn the display unit On or Off.
When turning Off the display
unit, tuner box will also be
turned to Standby mode after
1 min.
●
Standby switch
Turn the tuner
box on or off to
standby mode
●
Change the channel up/down. When a
function is displayed, press up/down to adjust
the setting of the selected function. When in
standby mode, switches TV on.
Changes the input mode
Selects channel in sequence
Volume Up / Down
C.A.T.S. (Contrast Automatic Tracking System) sensor
Senses brightness to adjust picture quality when
“Eco Mode” in the Picture Menu is set to “On” (p. 30)
●
Wireless Transmitter
Wireless Receiver
On and no communication : Red
On and communication state good : Green
On and communication state not good : Orange
Indicates malfunction : Red (blinking)
On and no communication : Red
On and communication state good : Green
Indicates malfunction : Red (blinking)
When the orange LED is lit, check the connection and transmission range. (p.12 and P.13)
When the red LED is blinking, turn the power of the tuner box and display unit off and then on again.
If the problem is not resolved, consult your local Panasonic dealer.
●
●
HDMI4 terminal
(p. 50)
SD Card slot
(p. 41)
AV4 terminals
(p. 50)
Headphones jack
(p. 50)
PC terminal
(p. 50)
