How to Use Menu Functions
Advanced
27
Menu
Item
Adjustments / Configurations (alternatives)
Setup
VIERA
Link Settings
VIERA Link
Sets to use VIERA Link functions
(Off / On)
●
VIERA Link functions become available when “VIERA Link” is set to “On” (p. 44).
Power on Link
Sets to use Power on Link functions
(Off / On)
(p. 44)
Power off Link
Sets to use Power off Link functions
(Off / On)
(p. 44)
Standby
Power Save
Controls the power consumption in Standby mode of the connected
equipment to reduce the power consumption
(Off / On)
(p. 44)
●
This function is available when “VIERA Link” is set to “On” and “Power
off Link” is set to “On”.
Intelligent
Auto
Standby
Makes non-watched or non-used connected equipment go into Standby
mode to reduce the power consumption
(Off / On (With reminder) / On
(No reminder))
(p. 44)
●
This function is available when “VIERA Link” is set to “On”.
System Menu
Shipping
Condition
Resets all settings to the original condition (p. 34)
System
Update
Downloads new software to TV (p. 35)
Software
Licence
Displays the software licence information
System
Information
Displays the system information of this TV
Other Settings
Auto
Standby
Sets the time the TV automatically goes to Standby mode when no operation
is performed for the selected times
(Off / 2 hours / 4 hours)
●
Inserting the SD Card to the card slot does not affect this function.
●
Automatic input switching with the connected equipment affects this
function and time-count will be reset.
●
The notification message will appear 3 minutes before going to Standby
mode.
Power Save
Reduces brightness of picture to economise on power consumption
(Off / On)
16:9
Overscan
Selects the screen area for displaying the image
(Off / On)
On: Enlarges the image to hide the edge of the image
Off: Displays the image in the original size
●
Set to “On” if noise is generated on the edges of the screen.
●
This function is available when aspect is set to “16:9”.
●
This function can be memorized separately for SD (Standard Definition)
and HD (High Definition) signals.
Region
Select
Selects the region where you live to adjust the standard time
(NSW / ACT
/ Victoria / Queensland / South Australia / Western Australia / Northern
Territory / Tasmania)
(p. 15)
Daylight
Saving Time
Select time offset from the standard time for Summer Time
(Auto / Off / +1/2 hour / +1 hour)
(p. 15)
●
Set to “Auto” normally.
DVI Input
Setting
Changes the black level in the image for HDMI input mode with DVI input
signal
manually
(Normal / Full)
●
When the DVI input signal from the external equipment, especially from PC,
is displayed, the black level may not be suitable. In this case, select “Full”.
●
The black level for HDMI input signal will be adjusted automatically.
●
A different menu will be displayed in the mode of SD Card (p. 36 - 42).
●
Only available items can be selected.
TH-L32U20A_EN.indb 27
TH-L32U20A_EN.indb 27
2/22/2010 4:08:51 PM
2/22/2010 4:08:51 PM
