Panasonic VIERA TH-50EX780Z, Руководство по эксплуатации

Страница: 14 / 36

English
14
50-inch model 58-inch model
■
When using the wall-hanging bracket
In addition to removing the pedestal, removing the
following back bracket is needed.
9 Remove the assembly screws / from the back
bracket .
10 Remove the back bracket .
11 Remove the assembly screws .
K
I
J
1
L
2
Assembling / Removing the pedestal
75-inch model
Assembly screw (4)
M4 × 14 (mm)
Pedestal
■
Preventing the TV from falling over
It is recommended to secure the pedestal to a furniture
as shown to prevent the TV from falling over.
●
This information is designed to reduce the risk of
injuries caused by the TV falling over. However, no
measure can guarantee protection in all cases.
Remove the tapes fixing the fall-prevention bands.
H
Adjusting the panel to your desired
angle
50-inch model 58-inch model 65-inch model
●
Do not place any objects within the full rotation range.
15°
15°
(View from the top)
Removing the pedestal
Be sure to remove the pedestal in the following
procedures when you repack the TV.
1 Remove the cover .
2 Remove the assembly screws from the base.
3 Lift the TV and pull out the pole from the base.
4 Put the TV onto a work table with the screen panel
down on the clean and soft cloth.
5 Remove the assembly screws from the support
bracket.
6 Pull out the pole from the main bracket.
7 Remove the assembly screws from the main
bracket.
8 Remove the main bracket.