6
7
Quick Start Guide
TV
OPTION DIRECT TV REC
EXIT
RETURN
INPUT
TV
PULL
Installing remote’s batteries
Batteries for the Remote
Control Transmitter
(2)
•
R6 (UM3)
Identifying Controls
Accessories / Options
Clamper
(2)
•
TMME289
Caution
•
Incorrect installation may cause battery
leakage and corrosion, resulting in
damage to the remote control.
•
Do not mix old and new batteries.
•
Do not mix different battery types (such
as alkaline and manganese batteries).
•
Do not use rechargeable (Ni-Cd)
batteries.
•
Do not burn or breakup batteries.
Remote Control
Transmitter
•
EUR7737Z50
Using the clamper
Increases or decreases
the programme position
by one. When a function
is already displayed,
press to increase or
decrease the selected
function. When in
Standby mode, switches
TV On.
Remote control
signal receiver
Changes the input mode
Function select
•
Volume / Contrast / Brightness /
Colour / Sharpness /
Tint (NTSC mode) / Bass /
Treble / Balance / Auto Setup
(p. 30)
Standard accessories
•
Identifying Controls
•
Accessories / Options
Check that you have the accessories and items shown
Operating Instructions
Pan European Guarantee Card
DVB LED
•
Active for Timer Programming or
Standby for Direct TV Recording :orange (flash)
Timer Programming On
:orange
Power LED
•
Standby: red
On: green
When using the remote control, indicates the TV has received a command.
1 Year Guarantee Registration
CRM (Customer Relationship Management)
•
Do not bundle the RF cable
and mains lead together (could
cause distorted image).
•
Fix cables with clampers as
necessary.
•
When using the optional
accessory, follow the option’s
assembly manual to fix cables.
Rear of the TV
snaps
To remove from the TV:
To loosen:
Keep pushing
both side snaps
Set the tip
in the hooks
Insert the clamper
in a hole
hole
1. Attach the clamper
2. Bundle the cables
Keep pushing
the knob
knob
hooks
1
Pull
open
Hook
2
Note the correct
polarity (+ or -)
Close
Cursor buttons to make selections and
adjustments
Standby On / Off switch
(Switches TV On or Off standby)
Sound mute On / Off
Changes aspect ratio
(p. 13)
Selects programmes in sequence
Teletext
(p. 18)
OK button to confirm selections and choices
Press after selecting programme positions to
quickly change programme.
VCR / DVD operations
(p. 17)
Volume
Programme Information
(p. 13)
Teletext Index
(p. 20)
Coloured buttons used for the
selection, navigation and operation of
various functions
EXIT
(Returns to TV screen)
Programme / channel change buttons (0-9)
and Teletext page buttons.
(p. 12 and p. 19)
When in Standby mode, switches TV On.
Access VIERA Link Menu
(p. 41)
TV Guide
(p. 14)
Option menu
Sets the selectable settings of viewing
and sound options easily
(p. 13)
Main Menu
Press to access VIERA Link, Picture,
Sound and Setup menus
(p. 21)
Subtitles
Showing subtitles
(p. 13)
Changes the input mode
TV - switches DVB (digital broadcasting)
/ Analogue mode
(p. 12)
AV - changes AV input mode
(p. 16)
DIRECT TV Recording
To immediately record programme in VCR /
DVD recorder with Q-Link connection (p. 38)
Returns to the previous menu
Still picture
(p. 13)
Teletext Hold
(p. 20)
Lift door to open
Mains power
On / Off switch
Caution
•
In order to maintain the unit’s performance and safety, be absolutely sure to ask your dealer or a licenced
contractor to secure the wall-hanging brackets.
•
Carefully read the instructions accompanying the plasma TV stand or pedestal, and be absolutely sure to take
steps to prevent the TV from tipping over.
•
Handle the TV carefully during installation since subjecting it to impact or other forces may cause product damage.
Mains Lead
•
K2CT3DH00018
Optional accessories
Pedestal
Plasma TV stand
Wall-hanging
bracket
(vertical)
TY-WK42PV3W
(angle)
TY-WK42PR2W
TY-WK42PR3W
TY-ST42D1-WG
TY-ST42D1-WK
TY-ST42D2-WG
TY-ST42D2-WK
TY-S37PX70WK
(TH-37PX70B)
TY-S42PX70WK
(TH-42PX70B)
( TH-37PX70B,
TH-42PX70B)
TY-S50PX70WK
(TH-50PX70B)
TY-ST50D1-WG
TY-ST50D1-WK
TY-ST50D2-WG
TY-ST50D2-WK
(TH-50PX70B)
