44
Settings
Items
Item Description
PC adjustments
Reset to defaults
Resets PC adjustments.
Sync
H & V
The H and V sync signals are input from the HD/VD connector. (p. 52)
On green
Uses a synchronized signal on the Video G signal, which is
input from the G connector. (p. 52)
Dot clock
Alleviates the problem if a picture appears to be vertically-striped, flickers partially or
is blurred.
H-position
Adjusts the horizontal position.
V-position
Adjusts the vertical position.
Clock phase
Alleviates the problem if the whole picture appears to flicker or is blurred.
First adjust the Dot Clock to get the best possible picture, then adjust the clock Phase
so that a clear picture appears.
●
It may not be possible to display a clear picture due to poor input signals.
Input
resolution
Switches to wide display.
●
VGA (640×480 pixels), WVGA (852×480 pixels), XGA (1,024×768 pixels),
WXGA (1,280×768 pixels)
●
Options change depending on signals
H-frequency
V-frequency
Displays the H (Horizontal)/V (Vertical) frequencies.
Display range
Horizontal: 15 - 110 kHz
Vertical:
48 - 120 Hz
HDMI settings
HDMI/DVI RGB
range (HDMI 1-2)
Auto/
Standard
(16-235)/
Nonstandard
Prevents the blown out highlights and blocked up shadows when
a wide-range signal is received. Selects between standard RGB
range (16-235 bits) or non-compliance (0-255 bits).
Auto: Switches the RGB range (Standard (16-235)/
Nonstandard) depending on the HDMI signal information.
Contents type
(HDMI 1-2)
Off/Auto/Photo/
Graphics
Sets content type to each HDMI input.
Auto: Switches content type automatically depending on the
HDMI signal information.
Photo: Best setting for JPEG viewing.
Graphics: Best setting for On-Screen display of connected
equipment.
• Some menus are grayed out depending on the input signal or condition.
(e.g. “3:2 pulldown” will be grayed out if the input signal is high definition or you are viewing photos, etc.)
Advanced
picture
3D Y/C filter
Off/On
Minimizes noise and cross-color in the picture.
Color matrix
SD/HD
Selects image resolution of component-connected devices.
SD: Standard Definition HD: High Definition
Only used with 480p video signal.
Block NR
Off/On
Reduces noise of specific digital signals of DVD, Cable box, etc.
Mosquito NR
Off/On
Reduces HDTV flicker noise in the contoured sections of an
image
Black level
Dark/Light
Selects Dark or Light. Valid only for external input signals.
3:2 pulldown
Off/On/Auto
Adjusts the picture recorded in 24 fps for optimum quality.
24p Direct in
60Hz/48Hz
48Hz: Achieves more cinematic playback by reproducing the
movie contents at twice the speed of 24 frames per second.
