26
"Main Menu" condition.
The Power should be off when determining the
installation location and direction.
At this time please verify what direction the TV screen
is to face (direction indicated by the arrow).
1.
Press the "Main Power Switch"
2.
6.
PRE.
TV/AV
+
–
AV 2 IN
– R –
L/MONO
AUDIO
S-VIDEO
VIDEO
MAIN MENU
Select the Preset Menu by using
the Position Left or Right button.
4.
MAIN MENU
3.
Press the "MAIN MENU" button.
MAIN MENU
Select the Geomagnetic Mode by
using the “Position” button.
5.
MAIN MENU
Helpful Hint
(1) If Geomagnetic changes still cause colour patches on the screen even after the TV is installed, turn the power off
and turn back on again after about 30 minutes.
(2) Adjustment for geomagnetic should be performed every time the location of the TV is changed.
(3) In some cases colour patches will not be completely eliminated even after adjustment, particularly in ferro-concrete
building and other structures susceptible to geomagnetic. In these cases adjust by changing the installation location.
Preset Menu Operation
Geomagnetism Correction
Since a large picture tube has been used, blurring of colours and strange discolouration patches may
occur depending on the direction the television faces. This is caused by a geomagnetic effect.
For optimum viewing, it is necessary to adjust the TV placement.
PRESET
PICTURE
88 PRESET
AUTO TUNE
MANUAL TUNE
SOUND SYS 5.5MHz
COLOUR SYS AUTO
FINE TUNE
SKIP
OFF
POS. CHANGE 88
GEOMAGNETIC 2
88 PRESET
AUTO TUNE
MANUAL TUNE
SOUND SYS 5.5MHz
COLOUR SYS AUTO
FINE TUNE
SKIP
OFF
POS. CHANGE 88
GEOMAGNETIC 2
88 PRESET
AUTO TUNE
MANUAL TUNE
SOUND SYS 5.5MHz
COLOUR SYS AUTO
FINE TUNE
SKIP
OFF
POS. CHANGE 88
GEOMAGNETIC 7
88 PRESET
AUTO TUNE
MANUAL TUNE
SOUND SYS 5.5MHz
COLOUR SYS AUTO
FINE TUNE
SKIP
OFF
POS. CHANGE 88
GEOMAGNETIC AUTO
2)
If TV uses Auto Geomagnetic correction:
Align “Auto” to the “1” position in the center using the
position Left “<” or Right “>” buttons. If discolouration
remains even after AUTO correction, press the position
Left “<” or Right “>” button to adjust the placement so that
the coloured patches in the four corners of the screen
disappear.
Advanced Remote Control Transmitter Operation
1)
If TV uses Manual
Geomagnetic correction:
Press the Position Left or Right
button to adjust the Geomagnetic
level so that the colour patches
in the four corners of the screen
do not appear.
