LED blinks 5 times
Trouble Mode
5V SOS
Defective Board
P, C, SC, SS,SD, D board or Panel
16
Disconnect the TV and measure the
resistance between pin 5 of connector P25 on
the P board and ground (Chassis).
Yes
No
Is there a
short to
ground?
Use a volt-meter and place the positive probe on pin 5 of connector P25 on the P board
while the negative probe is grounded. Plug in the TV and turn it on
Is
there
5V?
Yes
No
Replace
the D board
Replace
the P board
Disconnect P25 on the P board. Measure the
resistance between pin 5 of connector P25 on
the P board and ground (Chassis).
Yes
No
Is there a
short to
ground?
Replace
the P board
Reconnect P25 and disconnect SC20 on
the SC board. Measure the resistance
between pin 5 of connector P25 on the P
board and ground (Chassis).
Yes
No
Is there a
short to
ground?
Replace
the SC board
Reconnect SC20 and disconnect SS33 on the SS board.
Measure the resistance between pin 5 of connector P25 on
the P board and ground (Chassis).
Disconnect SC46 and reconnect
SC20 on the SC board. Measure
the resistance between pin 5 of
connector P25 on the P board and
ground Chassis).
Yes
No
Is there a
short to
ground?
Replace
the SD board
Go to the
next slide (A)
Yes
No
Is there a
short to
ground?
Replace
the SS board
Warning:
Disconnect AC Power prior to making any
disconnection or connection
Содержание Viera Link TH-42PZ80U
