Flow-Chart for Disassembly Procedure
No.
Item / Part
Fig.
Removal (Screw,Connector,FPC.
& Other)
1
FRONT UNIT &
FRON P.C.B.
Fig.D2
Detach the Grip Belt
Fig.D3
3-Screws (A)
Shoe Plate
1-Screws (B)
3-Tabs
Shoe Base
Fig.D4
Open the LCD Unit
1-Screw (D)
Fig.D5
1-Screw (D), 1-Screw (E)
Fig.D6
Open the Jack Cover
3-Screws (F)
Fig.D7
2-Tabs
FP6501
Remove the Front Unit &
Front P.C.B. in the direction of the
arrow.
2
SIDE R/LCD
UNIT
Fig.D8
3-Screws (G)
Fig.D9
3-Screw (H)
Support Angle
2-Screws (I), 1-Screw (J)
FP1, FP4
Side R/LCD Unit
3
REAR/EVF
UNIT
Fig.D10
Slide out the EVF.
6-Screws (K)
FP2, FP5
Rear/EVF Unit
4
LENS UNIT
Fig.D11
FP6001, FP6002
1-Screw (L)
Lens Unit
5
MAIN
SHIELD/JACK
UNIT
Fig.D12
FP3
4-Screws (M), 1-Screw (N)
Drive FPC (B2401)
Main Shield Unit
1-Screw (O)
Flash Trigger Unit
6
DVD DRIVE
UNIT, SIDE L
/OPERATION
UNIT
Fig.D13
Disk Cover Lock FPC
Slide the Lock Lever of Disk
Cover
Lock Unit to open the Disk Cover
Fig.D14
1-Screw (P), 1-Screw (Q)
Disk Cover Lock Unit
Fig.D15
1-Screw (R)
DVD Drive Unit, Side L/
Operation Unit
7
FRONT P.C.B.
Fig.D16
FP6502
3-Screws (S)
Front P.C.B.
8
LCD UNIT
Fig.D17
2-Screws (T)
Side R Piece
1-Screw (U)
LCD Open SW
Fig.D18
Open the LCD, and Turn the LCD.
2-Screws (V)
LCD Unit, 2-Earth Plates
9
SIDE R UNIT,
SIDE R P.C.B.
Fig.D19
5-Screws (W)
Speaker Plate
Side R Unit, Side R P.C.B.
10
MONITOR
P.C.B.
Fig.D20
2-Screws (X)
6-Tabs
LCD Case A unit
Fig.D21
FP902
Shaft Case Unit, LCD Earth Spring
Fig.D22
FP903
3-Tabs
Monitor P.C.B.
11
EVF UNIT
Fig.D23
1-Screw (Y)
Roll up the EVF FPC, and pull out
the EVF Unit in the direction of
the arrow.
No.
Item / Part
Fig.
Removal (Screw,Connector,FPC.
& Other)
12
EVF P.C.B.
Fig.D24
Rib (1) of EVF Case Unit removed
from the slot of EVF Slide Base
Unit, Rib (2) of EVF Case Unit is
removed by twisting EVF Case
Unit in the direction of the arrow.
EVF Case Unit, EVF Slide Base
Unit
Fig.D25
2-Tabs
EVF LCD Panel Unit
Fig.D26
FP952
4-Tabs
EVF P.C.B.
13
JACK P.C.B.
Fig.D27
1-Screw (Z)
B7001, B2
Jack P.C.B.
14
SUB P.C.B.
Fig.D28
P6601, P6602
Release the Cable of Flash
Trigger from Heat Sink Unit.
1-Screw (a)
2-Tabs
Shield Plate
2-Screws (b)
Main/Sub/Flash Board Unit
Fig.D29
B4, PS6001
Sub P.C.B.
15
MAIN P.C.B.
Fig.D30
2-Screws (c)
B5, B6001
Main P.C.B., Flash Board Unit
16
FLASH P.C.B.
Fig.D31
2-Tabs
Capacitor Holder A, Capacitor
Holder B
Flash P.C.B.
8.3. Disassembly Procedures
30
VDR-D300EG / VDR-D300E / VDR-D300EB / VDR-D300EP / VDR-D300EE / VDR-D300GC / VDR-D300GN / VDR-D300SG / VDR-D300GCS / VDR-D308GK